Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The Ortofon Concorde Music Bronze is a moving magnet cartridge equipped with a Nude Fine Line diamond stylus for precise groove tracking and critical, high-resolution audio reproduction. Compatible with all S-shaped tonearms thanks to its bayonet/SME connector, Ortofon have committed themselves to facilitating a hassle-free installation process without screws and wires.
The cartridge body has been designed to fit every Concorde Music series stylus, from the starter Red to the high-end Black LVB model, allowing you to simply swap and play once you're ready to upgrade. It incorporates a quad-coil generator system with split pole pins and silver-plated oxygen-free copper wire, along with Ortofon's proprietary rubber compound stylus suspension, to ensure exceptional channel balance and separation for a dynamic and lifelike sound.
Product Ref: 299902
Channel balance at 1 kHz | 1 dB |
---|---|
Output voltage at 1 kHz, 5cm/sec | 6mV |
Channel separation at 1 kHz | 26 dB |
Channel separation at 15 kHz | 17 dB |
Frequency response 20 Hz - 20 kHz | +2 / 0 dB |
Tracking ability at 315Hz at recommended tracking force | 80 µm |
Compliance, dynamic, lateral | 15 µm/mN |
Stylus type | Nude Fine Line diamond on Aluminium cantilever |
Stylus tip radius | r/R 8/40 µm |
Tracking force, recommended | 1.8 g |
Tracking angle | 20° |
Internal impedance, DC resistance | 1.27 kΩ |
Cartridge colour | Black/Bronze |
Cartridge weight | 18 g |
Recommended load resistance | 47 kΩ |
Internal inductance | 815 mH |
Recommended load capacitance | 150-300 pF |
Product code | ORTOCONCORDEBRONZE1A |