Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The Ortofon 2MR Red Cartridge has been designed for tonearms with a low ride height, featuring a cartridge body that is three millimetres shorter than the standard 2M model. The "R" quite simply means "Reduced" suited to certain tonearms from turntable manufacturers like Pro-Ject, Rega, and Linn where the correct vertical tracking angle (VTA) is not adjustable or compatible with larger mounting heights.
The 2MR is otherwise unchanged and uses the same high-performance technology as the standard 2M Red. It even features the same stylus, which makes it easy to swap out or upgrade to the 2M Blue Stylus if you choose. With its tipped elliptical diamond stylus profile, this cartridge balances greater tracking and retrieval of the information in the record groove whilst remaining affordable, providing an open and dynamic sound.
Featuring Ortofon's split-pole pin technology, the 2MR Red Cartridge minimises eddy currents and achieves a flat frequency response. This allows for a wide frequency range of 20Hz to 22kHz, ensuring every nuance and detail in your music is faithfully reproduced. Whether you're a budget-conscious audiophile or a beginner looking to equip a specific model of tonearm, the 2MR Red Cartridge is the perfect starting point.
Product Ref: 286091
Output voltage (@ 1000Hz, 5cm/Sec.) | 5.5 mV |
---|---|
Channel balance (@ 1000Hz) | 1.5 dB |
Channel separation (@ 1000Hz) | 22 dB |
Channel separation (@ 15000Hz) | 15 dB |
Frequency range (@ -3DB) | 20 - 22000 Hz |
Frequency response +3 / -1DB | 20 - 20000 Hz |
Tracking ability (@ 315Hz at recommended tracking force) | 70 μm |
Compliance, dynamic, lateral | 20 μm |
Stylus type | Tipped Elliptical |
Tracking force range | 1.6 - 2.0 g |
Recommended tracking force | 1.8 g |
Tracking angle | 20 ° |
Internal impedance | 1300 Ω |
Internal inductance | 700 mH |
Cantilever material | Aluminium Tube |
Recommended load impedance | 47000 Ω |
Recommended load capacitance | 150 - 300 pF |
Cartridge weight | 6 g |