Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The Pro-Ject Juke Box S2 Stereo Set is a high-quality all-in-one sound system that includes a turntable and two speakers. The turntable ingeniously combines a pre-amplifier and power amplifier into a single, vibration-free chassis and delivers up to 50W of power. This lets you save loads of space without compromising the rich, vinyl sound. Once set up, the 300mm acrylic platter will smoothly rotate thanks to an efficient belt-drive system, helping reduce static electrical noise to fully optimise the performance of your records.
For superior record tracking, the Juke Box S2 features an 8.6-inch aluminium tonearm with premium sapphire bearings. A pre-installed Pick it 25A MM Cartridge uses pure silver coil windings for higher quality dynamic playback when compared to other moving magnet cartridges, propelling your records to new heights. Truly all-in-one, the Juke Box S2 also features a Bluetooth receiver so you'll be able to wirelessly stream your music through the turntable and speakers with CD-quality sound.
By using two external Speaker Box 5 S2 speakers, the system avoids unnecessary vibrations produced by driver motion that could impede either data retrieval or sound. These bookshelf speakers are equipped with a 25mm silk dome tweeter and 130mm fibreglass cone woofer, providing a balanced, wide-ranging soundstage that is essential for any vinyl enthusiast. Ultimately, the Juke Box S2 Stereo Set provides you with everything you need to get your records spinning.
Product Ref: 265792
Power output | 2 x 50 Watts (4 Ohm) |
---|---|
Outputs | SpeakersLine out (fixed)Phono out |
Inputs | BT1 x Line (analogue) |
Speed | 3345 (manual speed change) |
Principle | Belt drive |
Platter | 300 mm acrylic |
Main bearing | Stainless steel in bronze bushing |
Tonearm | 8.6-inch aluminium |
Power consumption | 110W max |
Dimensions (W x H x D) | 415 x 118 x 334mm |
Weight | 5.2 kg net |
Sensitivity (1W/1m) | 88dB |
---|---|
Recommended amplifier power | 10-150 Watt |
Tweeter | 25mm silk-dome Neodymium magnet |
Woofer | 130mm fiberglass cone |
Frequency response | 55Hz - 20kHz |
Nominal impedance | 8 ohms |
Dimensions (W x H x D) | 160 x 271 x 215mm |
Weight | 4.9kg |
Product code | PJUKEBOXS2SETW |
---|