IOTA VX SA3 & Elac Debut B5.2 Hi-Fi System Bundle
Key Features
- Customisable IOTA VX SA3 hi-fi system
- 50W continuous out (8ohm, 2ch. driven) and on-board Wolfson WM8524 DAC
- Unique Convex dust cap for transparent crossover between drive units
- Front-facing bass reflex port for improved low end performance
- Can't find the bundle you want? Call 01706 878444 and we'll make the perfect package for you!
IOTA VX SA3 & Elac Debut B5.2 Hi-Fi System Bundle Overview
The IOTA VX SA3 is a robust Class AB integrated stereo amplifier with onboard Wolfson D/A conversion to offer you an instant audio upgrade. With a total of six analogue inputs, including an in-built phono (MM) for vinyl enthusiasts, this amp is more than ready to become the centre of your hi-fi setup and it doesn't stop there!
Featuring digital inputs, a subwoofer pre-out and even packed with the optional Bluetooth adaptor for long-range control, the SA3 has everything you need for high-quality, high-fidelity audio. IOTA offers intuitive engineering to safeguard the purity of your audio signal, boasting low distortion and a vivid dynamic response.
The ELAC Debut B5.2 Bookshelf Speakers are perfect for home listening in tighter spaces. The thick MDF cabinets are on hand to reduce vibrations which creates a clean sound and use a soft-dome tweeter with a wide-roll surround to create an enveloping sound. The woven aramid-fibre woofer generates outstanding audio that lets you connect with the music, achieving 46 to 35,000 Hz frequency response, with exceptional lower frequencies.
Product Ref: 283704
Full Description
View Full Description
IOTA VX SA3 Integrated Stereo Amplifier
Abundant Analogue
Let the SA3 be your hub for hi-fi. Featuring five Line-in connections, plug-and-play a wide range of audio sources including CD players, cassettes, network streamers and more. A dedicated phono (MM) input is also included, rounding the total up to six and providing a platform for retro turntable enthusiasts. A convenient subwoofer output lets you open the bass range of your speaker system and expand to a 2.1 home audio setup.
Emphasis on Power
Express yourself. The IOTAVX SA3 is capable of producing confident vocals and an open soundstage. Hear instruments in more realistic detail. This amplifier can provide a continuous 50W two-channel power output at 8Ω load and up to 100W for hungrier 4Ω speaker systems. Thanks to the subwoofer output, your audio will sound full and responsive, qualities necessary for high fidelity audio.
Share the Load
As well as two-channel drive, the SA3 has also been provisioned with a Mono mode switch, making bi-amping a more accessible option for the curious and practiced alike. Working especially well with power amplifiers such as the IOTA VX PA3, split the output load and dedicate up to 180W (4Ω bridged) to speaker systems not usually compatible with amplifiers of this size. 12v triggers are also available for synchronised control.
More and More
Along with six analogue connections, the IOTA VX SA3 hosts both optical and coaxial inputs, letting you connect digital audio sources as well as providing you with an easy upgrade for television speakers and smaller screens, outputting a 2.1 audio experience.
Treble and Bass
Every ear is unique. That’s why having advanced audio level adjustment is critical for a modern home system. As well as volume adjustment from the front panel, treble and bass levels can also be set using the remote control. Tune music to your taste.
Bluetooth Adaptor
The SA3 has been packed with their intuitive Bluetooth adaptor, attachable via the extension port on the rear of the amplifier. This establishes a quick, wireless and distance streaming input for music via phones, computers and other compatible devices.
Key Features
- Class AB amplifier offers excellent, low noise performance
- Handy display for comprehensive menu navigation
- Tone control allows you to adjust audio levels to your taste
- Bass and treble changes in 1dB increments up to 10dB adjustment
- Includes SA3 remote control for easy access to advanced audio options
- 12v trigger switch and dimmer link outputs let you synchronise control with bridged amplifiers
- Pre-out connections let you use the SA3 as a preamplifier
- Headphone output for 6.35mm jack
- Bluetooth adaptor included
- Relatively compact, unobtrusive design no higher than 6cm
Please Note: It is important that the Amplifier Mode switch on the rear of the unit is set to Mono when bridging with external amplifiers. When set to Mono mode, the IOTAVX SA3 will deliver right channel audio.
ELAC Debut B5.2 Vinyl Bookshelf Speakers
High Performing Woofer and Tweeter
The ELAC Debut B5.2 bookshelf speakers are harnessed with 25mm soft dome tweeters with a wide-desperation waveguide and a wide-roll surround that takes response up to 35,000 Hz. The 127mm woven aramid-fibre woofer offers a strong sound, with low-frequencies that are sure to get you engrossed in the audio.
Bass-Reflex
The 2-way bass reflex design ensures that you get the most diverse sound possible, which will optimise all music genres. The ELAC Debut B5.2 bookshelf speakers offer 6 ohms impedance and 86 dB sensitivity to supply a dynamic audio performance.
MDF cabinets
The B5.2 bookshelf speakers offer strong MDF cabinets with a delightful black finish that will assimilate into your home with ease. The cabinets will reduce vibrations enabling a crisp sound. These speakers also provide flexible positioning options.
Features
- Two-way bass reflex design ensures a diverse sound.
- 46 to 35,000 Hz frequency response enables immersive audio.
- 6 ohms impedance and 86 dB sensitivity get the most out of your music.
- MDF cabinets offer a rigid casing and a stiff sound.
- The bass port is positioned at the front of the cabinet ensuring that audio performance is not affected regardless of where the speakers are placed.
- The cloth dome tweeter provides accurate, high frequencies.
- Woven aramid woofer creates thundering sounds.
IOTA VX SA3 Specifications
Specifications and Connections
| Product type | Integrated Stereo Amplifier |
|---|---|
| Continuous power (load-dependent) | 50W (8Ω, 2 channels), 100W (8Ω, 1 channel bridged)100W (4Ω, 2 channels), 180W (4Ω, 1 channel bridged) |
| Audio inputs | 5 x RCA (input sensitivity 200mV)1 x Optical1 x Bluetooth (requires attached IOTAVX Bluetooth adaptor)1 x Phono (MM) (input sensitivity 2.5mV) |
| Audio outputs | Speaker level connection1 x subwoofer output1 x pre-out, 1 x headphone output |
| Further connections | 1 x RS-232 inputs2 x trigger output1 x dimmer control (10 levels) |
| Total harmonic distortion (THD+N) | ≤0.02 @ 1kHz (nominal value: A-weighting) |
| Frequency response (+/- 3dB) | 10Hz – 100Hz |
| Signal to Noise ratio (IHF “A”) | > 100dB |
| Channel separation | >80dB |
General
| Power supply | 115VAC or 230VAC, @ 50/60Hz |
|---|---|
| Power consumption | 220W maximum |
| Standby consumption | <0.5W |
| Product dimensions (W x H x D) | 435 x 59 x 240 mm |
| Product weight | 6.5 kg |
ELAC Debut B5.2 Specifications
Dimensions
| Dimensions W x D x H | 180mm x 233mm x 341mm |
|---|---|
| Net Weight (each) | 13.0 lb / 5.9 kg |
General
| Speaker type | 2- Way Bass Reflex |
|---|---|
| Tweeter | 1″ Cloth Dome |
| Woofer | 5-1/4″ Aramid Fiber |
| Crossover Frequency | 2200Hz |
| Frequency Response | 46Hz – 35000Hz |
| Sensitivity | 86db @2.83v/1m |
| Max Power Input | 120 Watts |
| Nominal Impedance | 6 Ω; minimum 5.1 Ω |
| Cabinet | CARB2 Rated MDF |
| Cabinet Finishes | Black Ash vinyl |
| Port | Dual Flared |
| Binding Posts | 5-way metal |
| Reviews of our service
View all
