Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo when turntables reigned supreme. The Miracord 50 is carefully engineered with a beltdrive motor and aluminium die cast platter. A precision static-balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in phono pre - amplifier, allowing you to add this turntable to any music system.
Product Ref: 207158
ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo when turntables reigned supreme. The Miracord 50 is carefully engineered with a beltdrive motor and aluminium die cast platter. A precision static-balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in phono pre - amplifier, allowing you to add this turntable to any music system.
ELAC's groundbreaking Debut Series loudspeaker lines, Miracord 50 plays with a room- filling, rich annd dynamic sound that belies its price. Analog is about warmth, detail, texture, and naturalism, and this table delivers them all with style, smoothness and accuracy. Miracord 50's abilities owe to its construction. Its superb isolation comes by way of an anti-resonant chassis that minimises vibration and feedback. A low-noise DC servo motor drives the platter and belt with remarkable stability.
The tonearm is a static-balance, straight-tube design with precision bearings, builtin anti-skate adjustment and removable bayonet-style headshell.
Unlike most turntables, the Miracord 50 comes complete with a built-in phono preamp for correct RIAA equalisation.
Superior isolation is achieved with a chassis designed to minimise the sonic effects of vibration and feedback.
Turntable Section Drive System | Belt drive |
---|---|
Motor | DC motor |
Selectable Speeds | 331⁄3 and 45 rpm |
Motor Servo | Speed rotation and servo system |
Rotation Speed Variation | +/-1% |
Wow And Flutter | 1% |
Signal-to-Noise Ratio | -67 dB or higher (A-weighted) -60 dB or higher (unweighted) |
Platter | Aluminium die-cast |
Platter Diameter | 0 in / 300 mm |
Tonearm Section Type | Aluminium tube, static-balanced |
Effective Arm Length | 8 in / 223.6 mm |
Stylus Pressure Range | 0 to 0 g |
Cartridge Weight Range | 5 to 6.0 g |
Effective Arm Mass | 4 g |
Overhang | 6 mm |
Offset Angle | 25 degrees |
Anti-Skating | Adjustment Supported |
Main Bearing | Stainless steel |
Cartridge Section Type | Audio-Technica AT91 moving magnet |
Stylus Construction | Bonded diamond |
Mount | Half-inch |
Frequency Response | 20 Hz to 20 kHz |
Channel Separation | >18 dB |
Channel Balance | 5 dB |
Vertical Tracking | Angle 20 degrees |
Stylus Pressure | 0 g +/-0.5 g |
Cartridge Weight | 0 g +/-0.5 g |
Headshell Weight | 0 g (including screws, nuts and wires) |
Phono Equaliser Amplifier Type | Moving magnet (MM) |
Phono Output | 5 mV (1 kHz, 3.54 cm/sec) |
Line Output | 140 mV (-17 dBV) |
Phono/Line | Switchable |
Supported Load Impedance | 47 kΩ |
Connector | RCA pin jack including RCA cable accessories |
Voltage | 100 to 240 V AC / 50 to 60 Hz |
Power Consumption | 1.5 W (less than 0.5 W at standby) |
Dimensions | (WXHXD) 5.5 x 16.05 x 14.20 |
Weight | 12.10 lb |