Custom Design Inert Filler For Speaker Stands (4 Pack)

Full Description

• Acoustic Properties

  

• Value

  

Acoustic filler should be a staple of any audioholics shopping list and this inexpensive inert filler from Custom Design is made from dense material to draw out the very best performance from your speakers. Custom Design Inert Filler is designed with the best shape to eliminate space and voids creating a solid, dense environment which aids audio reproduction.

Mass loading and dampening the centre support column(s) is an important initial upgrade. Once mass loaded to our recommended amount, the performance will be particularly noticeably to the bass frequencies, with a more controlled and better timing to the bass frequency. If you feel the bass still requires enhancing and control then add a little more Inert Filler.

Inert Filler is an inert material, none resonant, none magnetic with the dense consistency and angular particle size. These shapes minimise the prevent voids (pockets of air) occurring inside the support column(s), minimising the presence of air and dampening any possible resonance influence from the speaker stand support column(s).

As a simple guide to follow, Custom Design recommend at least 2 bags of Inert Filler per 600mm column if it is not supplied as standard. Please be aware that we have found over mass loading can have a detrimental effect on the performance of your speaker, removing any benefit especially to the bass frequency.  4 individual bags Supplied.

• 4 Individual bags supplied